本公司3月26號09點57分報道:TCJT-1型土工布圓盤取樣器選購注意事項@新聞中心 產品用途 YI、TCJT-1型土工布圓盤取樣器用途: TCJT-1型土工布圓盤取樣器其性能符合JTGE50公路土工合成材料試驗規程、SL235土工合成材料試驗規程、用手切取各種毛紡、混紡、化纖、針織等織物的圓形樣品。 Application of tcjt-1 geotextile disk Sampler: The performance of tcjt-1 geotextile disc sampler conforms to jtge50 test specification for highway geosynthetics and sl235 test specification for geosynthetics. Round samples of various wool, blended, chemical fiber and knitted fabrics are cut by hand.
使用方法 四、TCJT-1型土工布圓盤取樣器使用方法: 1、取待裁織物,量好厚度,按上述調整好取樣器刻盤。 2、將待織物平鋪軟木墊上,將圓盤取樣器放在織物上,手扶住外罩7,手握住波紋手輪1,并旋加定壓力,然后順時針旋轉波紋手輪1(轉角>90度)即可將圓試樣截取。 Use method of tcjt-1 geotextile disk Sampler: 1. Take the fabric to be cut, measure the thickness, and adjust the sampler dial according to the above. 2. Place the disc sampler on the fabric, hold the outer cover 7 by one hand, hold the corrugated handwheel 1 by one hand, and screw in a certain pressure. Then rotate the corrugated handwheel 1 clockwise (the angle is more than 90 degrees) to cut the round sample.
五、TCJT-1型土工布圓盤取樣器注意事項: 1、本儀器刀片刀口很鋒利,使用中不得將手放在底部,以免損傷。 2、本儀器裁取試樣應在軟木墊上進行,儀器不用時擦拭干凈,置于儀器盒中,以免儀器損壞。 使用段時間后如刀片不鋒利,按3.1條更換刀片。 Precautions for tcjt-1 geotextile disc Sampler: 1. The blade edge of the instrument is very sharp. Do not put your hand on the bottom to avoid damage. 2. The sample of the instrument should be cut on the cork cushion. When the instrument is not in use, it should be wiped clean and placed in the instrument box to avoid damage.If the blade is not sharp after a period of use, replace it according to 3.1.
主營產品:土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器 Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument